Tweet
I have a new to me 2011 SANTE 210. When we bought the boat we went on a test drive with the previous owner and the starboard ballast had to be pressed twice but it did end up filling. On our first weekend out i believe we pressed it atleast 2 or 3 times and it did eventually fill. Next weekend it seemed to fill to half, now the last 2 weekends it isnt filling at all after multiple times of pressing the button.
Both the port ballast and belly ballast work just fine with 1 button press and display on the LINC system correctly. The previous owner said he had just replaced the impellers, but since this is our first inboard i dont know anything about the ballast. We do have an extra green impeller he gave us. When I push the starboard side it sounds like it kicks on but it never shows that has water in it. The boat definitely leans to the port side so i know that it isnt filling. Is there something i can check without having to send it to the dealer?
Boat has 125 hours and has the zr409 motor. Ballast is completely stock.
Both the port ballast and belly ballast work just fine with 1 button press and display on the LINC system correctly. The previous owner said he had just replaced the impellers, but since this is our first inboard i dont know anything about the ballast. We do have an extra green impeller he gave us. When I push the starboard side it sounds like it kicks on but it never shows that has water in it. The boat definitely leans to the port side so i know that it isnt filling. Is there something i can check without having to send it to the dealer?
Boat has 125 hours and has the zr409 motor. Ballast is completely stock.