Impeller change 2019 GS 22

[P Matthews]

New to Nautique just purchased boat last week. Can anyone point me in the direction for instructions on a basic impeller change for a 2019 GS 22 with ZR4 (hopefully pics or videos). Local dealer is 2 plus Months out for service opening and I do not want to risk waiting that long, especially planning on putting lots of hours on it during May and June. Boat has 65 hours on it as purchased in June of 2020. Search site and could not find any info specific to this late model year and type.

Thank You

[hal2814]

You should be able to look up your engine here. https://www.planetnautique.com/vb5/f...uals-brochures

The instructions are pretty universal: remove belt, remove pump housing cover, remove impeller, replace impeller, replace pump housing cover, replace belt. The link above will just give you specifics on your belt routing, pump location, and pump housing. Otherwise, pretty much any tutorial for impeller replacement will work.

[Smindustries]

It's on this site. Page 9 of this PDF:

https://www.planetnautique.com/Corre...18/18477ti.pdf

[NautiqueJeff]

Or get the same manual right here on this site.

https://www.planetnautique.com/Corre...18/18477ti.pdf

[P Matthews]

Just got a chance to take a look at the belt area and noticed their is a plastic cover on the rear of the engine, anyone know what tools needed to remove the belt area cover? What to have everything ready and assessable before removing the rear locker divider panels and tackling the impeller change. 2019 GS22

Thank You

[charlesml3]

The belt cover is simple. There are two thumb screws at the top of the engine on the cover. Remove both of them and the cover will swing back and slide off the pins at the bottom. Just leave it laying in the bilge under the engine while you're working on the impeller. It's handy for catching any tools you drop.