4 Blade Prop Replacement

[wkeith]

I have a 1990 SN with 351 W and would like a 4 blade prop to perform similar to the standard 3 blade, but better! Suggestions?

[SilentSeven]

You can search on the pros and cons of 3 vs 4 bladed props. Lots of information here and on ballofspay.com on that topic.

Wakemakers.com has a nice prop selection tool you can use to pick choices for your boat.

https://www.wakemakers.com/props/

[wkeith]

Thanks, I'll check it out!

[NautiqueJeff]

You might also try an OJ SkiPro. You'd need to call them to find the best fit, but they can set you up right.

https://www.ojprops.com/products/skipro/

[wkeith]

Great, thanks Jeff!

[Jonny Quest]

Assuming that you have a standard LH rotation engine and PCM 1.23:1 transmission, then I would lean toward the ACME 654. If you are a RH engine with 1:1 Velvet, then I would call ACME.

JQ

[wkeith]

Thanks for your reply. I have the standard 240 HP RH engine with the Velvet Drive 1 to 1 ratio.