Tweet
Hey all,
On my 2020 G21, I was checking to make sure that the NSS cover plate screws were tight (a friend’s had backed out), and noticed that there are 2 screws on each actual NSS plate (not the plastic covers) that are accessible with the covers still on. I checked all 4, and found that 1 screw on each plate was stripped. Is there a product that anyone recommends that can be used to fill the screw hole, via squeegee or syringe, that will bind and harden and allow me to properly set the screws? Or am I going at this completely wrong? I don’t think a larger diameter screw will fit in the NSS plate mounting hole.
I realize that this is a warranty issue, but the dealer is 4 hours away and backed up like everyone else. Thanks in advance!
On my 2020 G21, I was checking to make sure that the NSS cover plate screws were tight (a friend’s had backed out), and noticed that there are 2 screws on each actual NSS plate (not the plastic covers) that are accessible with the covers still on. I checked all 4, and found that 1 screw on each plate was stripped. Is there a product that anyone recommends that can be used to fill the screw hole, via squeegee or syringe, that will bind and harden and allow me to properly set the screws? Or am I going at this completely wrong? I don’t think a larger diameter screw will fit in the NSS plate mounting hole.
I realize that this is a warranty issue, but the dealer is 4 hours away and backed up like everyone else. Thanks in advance!
Comment