Tweet
Got about a foot long crack in the ski locker where dingy, smelly bilge water is running in. Anybody ever have this? I’m surprised that there is this much bilge water even in the hull, but when I run the pump it kicks on for maybe a second then kicks off (indicating it’s float isn’t tripped).
1: should I be concerned about the smell and amount of bilge water running into the locker here? My boat currently smells like a sewer.
2: anybody have ideas on fixing the crack? Is this a job for flex seal is another epoxy, or do I need to be looking at a bigger solution?
3: what is that hose? It’s not connected to anything on the downside, and runs up to the driver console area at the top.
In pic, the crack is right at water level on the right side.
thanks in advance.
1: should I be concerned about the smell and amount of bilge water running into the locker here? My boat currently smells like a sewer.
2: anybody have ideas on fixing the crack? Is this a job for flex seal is another epoxy, or do I need to be looking at a bigger solution?
3: what is that hose? It’s not connected to anything on the downside, and runs up to the driver console area at the top.
In pic, the crack is right at water level on the right side.
thanks in advance.
Comment