quick and easy fix for loose cup holder??

[dbass880]

Any ideas on how to repair loose cup holders? They come out when pulling drinks out. It’s on a 2020 G23. I can get to the back side at all.

[2016SPORTNAUTIQUE200]

3M double sided tape

[GMLIII]

3M double sided tape

Sounds like a good idea, but does it work.? I have the same problem on my 2017 G23 as the OP

[2016SPORTNAUTIQUE200]

Yes. 3M is like the new age duct tape. fixes almost anything. If it doesnt work then its easy to get rid of and doesnt leave a mess like glue or duct tape

[GMLIII]

Yes. 3M is like the new age duct tape. fixes almost anything. If it doesnt work then its easy to get rid of and doesnt leave a mess like glue or duct tape

Is this the 3M product you used?

(1 Pack) 3M 1 Inch Width 15 Ft Length VHB 5952 Black Heavy Duty Multipurpose Double Sided Tape
by Overdrive Brands
Learn more: https://www.amazon.com/dp/B07K4PQG8P...4P7XVR7SAFENBG

[dbass880]

I happen to have some. I’ll give it a try. Like you said, it certainly will not hurt anything.

[THE HECKLER]

Wrap the bottom of the cupholder just below the flange with a few rounds of duct tape just to barely be able to re-insert it into the opening. Works really well
Saw this used on my chapparell sundesta 210 from the factory.

[GMLIII]

Just tried 3-M double sided tape to eliminate the loose cup holders in my 2017 G23 and it did not work. Anyone have any better ideas to prevent this problem let me know.

[Sammm724]

Put a heavy drink in there and it should hold the cup holder down!

[biacs]

I get the 4” dryer vent clamps and put them underneath till they’re snug.

Online or any hardware store: Dryer Vent Tension Clamp - 4” Diameter (5 Pack) https://www.amazon.com/dp/B07S1BKL1F...ing=UTF8&psc=1


Sent from my iPhone using Tapatalk

[gun-driver]

Bead of clear silicone adhesive under the top lip.

[mikenbike211]

a couple wraps of electrical tape around the cupholder isually does the trick