Installing MOMO wheel on an 05 SV211

[Polidori]

Wanted to install an aftermarket steering wheel on my ‘05 SV211 but didn’t see any threads about doing it. Here ‘ya go.

Couldn’t find a MOMO hub adapter for a Nautique, so I found a 74mm to 70mm adapter on Amazon ($30) from a manufacturer called Crowder. Installed it on the existing Nautique hub and the new MOMO wheel (Volanti) then screws onto the adapter. I used the MOMO horn button that came with the wheel because the OEM Nautique button is a tad too big.

The Volanti is slightly larger than the stock wheel by about a 1/4” but the difference is so small that you don’t even notice.

Easy upgrade if you’re tired of the OEM wheel and don’t like the price of the Full Throttle wheel.

[MN Ryan]

Cool.

What's the process to get the existing wheel off?

Sent from my SM-G970U using Tapatalk

[ScooterMcgavin]

Looks nice

[Polidori]

Six allen head screws hold the OEM wheel to the hub.

[Spud]

A new wheel always freshens up the look of a dash.. we use ISOTTA for all our batts and customer boats here in Australia... Our Current 210 with ISOTTA BERRA

[Spud]

a few more...

[Spud]

another

[MN Ryan]

Dang, just another unnecessary thing to add to the list.