My boat just died while I was being pulled...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jarabacoa
    • Jul 2003
    • 40


    #1

    My boat just died while I was being pulled...

    I have an 03 san and while I was being pulled it just died and all power cut out. Then we had to restart it. It happened again and would not restart. The guages would not fire up and the rpm guage was stuck at about 1800 rpm. Boat would crank just fine but not start. I was towed in to lift and then it started. What gives!! Anyone had this issue? [/b]
    Tags: None
    • Andrew
      Senior Member of PLANETNAUTIQUE
      • Aug 2005
      • 891

      • Tuscaloosa, AL

      #2
      RE: My boat just died while I was being pulled...

      sounds like a loose connection somewhere. check all the battery cable connections/grounds, and clean any that have any corrosion

        Comment

        • Jarabacoa
          • Jul 2003
          • 40


          #3
          RE: My boat just died while I was being pulled...

          I did just have two new batteries installed at the dealer and this was the first time out since.

            Comment

            • fyerfytr
              • Jun 2005
              • 83

              • Des Moines, Iowa

              #4
              2nd that check the master power toggle/bilge - just a thought..

              Mark

                Comment

                Previous template Next
                Working...
                X