STBD NSS Over current

[zmnypit]

Had the boat out yesterday for the first time in 3 weeks and kept getting STBD NSS over current. You could hear the actuator making a whining noise until it would eventually quit and throw the fault. I'm going to order a new one but my question for right now beings there's only a couple weeks or so left in season is could I just take the port side actuator and swap it to the Stbd side to get my by until winter?

[ScooterMcgavin]

I don’t see why not, they are the same part. Plus will give you a chance to inspect the actuators and plates for binding. You will need new sealant for the bolts

[zmnypit]

I don’t see why not, they are the same part. Plus will give you a chance to inspect the actuators and plates for binding. You will need new sealant for the bolts

Well I was thinking about swapping plugs from inside. I took the covers off yesterday and the plates need a good cleaning so went ahead and took them apart. Both actuators were full of water so looks like a rebuild or replacement coming sooner than later.

[Nautiquehunter]

I have a pair of actuators that might work let me know if you want them

[zmnypit]

I have a pair of actuators that might work let me know if you want them

Shoot me a message. Looking for the 21145-001 for the newer G's. The pre 17s use a smaller one

[Nautiquehunter]

sorry they are the smaller ones

[zmnypit]

sorry they are the smaller ones

No worries. I was able to fully rebuild the ones I have yesterday.