Tweet
2016 SAN 210. PCM EX343. While winterizing, the exhaust corner brass plug was damaged. Plug (5) in the manual below. Can anyone tell me the correct plug size to purchase?
Also, for the life of me, I can't find (4). There is a large brass "T" after the inlet filter close to the floor. The large inlet and large outlet are the top of the tee, likely 1" lines. There is a smaller hose connected as the third leg, maybe 1/2-3/4" Is this the transmission cooler hose? If so, they are hard lines and it does not want to budge off the T. Any suggestions?
Thanks!
Also, for the life of me, I can't find (4). There is a large brass "T" after the inlet filter close to the floor. The large inlet and large outlet are the top of the tee, likely 1" lines. There is a smaller hose connected as the third leg, maybe 1/2-3/4" Is this the transmission cooler hose? If so, they are hard lines and it does not want to budge off the T. Any suggestions?
Thanks!