Tweet
I've got a 2003 210 with the Excalibur and currently run an Acme 1578 (13.5 x 14.25 .105 cup). It's the one suggested for running heavily loaded, which I rarely do. It's got fantastic holeshot but the boat runs high RPM at cruising speed as a trade off.
The next obvious choice "down" is the Acme 856 (13.25x15.5 .060 cup) or what I believe was stock (?) the Acme 644 ( 13.25x16 .105 cup).
Anyone have data on speed and RPM with these props? I googled a bit but didn't find what I was looking for. The wakemakers chart is where these suggestions come from, I'm just looking for a real-world number on the 856 or 644.
Mostly these days we cruise around with my family, I do some wakeskating/wakeboarding but not a ton, and rarely with ballast.
On an old Supra (boat) forum there was a sticky thread with engine/trans/prop/rpm/speed readings, which was handy. But doesn't help me here.
The next obvious choice "down" is the Acme 856 (13.25x15.5 .060 cup) or what I believe was stock (?) the Acme 644 ( 13.25x16 .105 cup).
Anyone have data on speed and RPM with these props? I googled a bit but didn't find what I was looking for. The wakemakers chart is where these suggestions come from, I'm just looking for a real-world number on the 856 or 644.
Mostly these days we cruise around with my family, I do some wakeskating/wakeboarding but not a ton, and rarely with ballast.
On an old Supra (boat) forum there was a sticky thread with engine/trans/prop/rpm/speed readings, which was handy. But doesn't help me here.
Comment