New Linc, screen is still black 2014 g23

[jlliles87]

My linc screen went totally black while in use (sitting still) and won't come back on. Followed dealer suggestions and ended up ordering a new screen. Plugged the new screen in and it's still unresponsive. I'm showing there is power making it to the connectors that plug into the linc. Anybody know where else I can test grounds/fuses. If you have anything to contribute please be specific with a location. I'm un familiar with where all the different parts are

Sent from my SM-N960U using Tapatalk

[vision]

I mentioned this in another thread last week. My G23 lost power to the linc due a bad battery switch and bad inline pole fuse on the back of it. Probably not your issue but I would pull the red battery switch and check. I believe on my 13 the power to the screen and circuit board were on a different circuit. But I could be remembering incorrectly.

[jpwhit]

For the screen to turn on, you need +12v on pins 7 and 15 of the black connector. Ground on Pin 8.