Replacing starter on SV211

[Chad186]

Hello all, I am getting ready to replace the starter on my SV211 and wanted some input before doing so. The bolts to replace the starter are difficult to get to, can anyone give me some advice on how you did it? Did you have to remove the ballast tank in order to get to the bolts as it’s an extremely tight work area? Any input is greatly appreciated. TIA

[Boats Bros]

I’ve never taken out a ballast tank when changing a starter. It’s a tight fit but there’s room barely

[charlesml3]

I've replaced a start on a SV-211 and found it impossible without removing the tank on that side. You just can't get to the bolts otherwise.

-Charles