Clearing bow/floor drain SV211

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Polidori
    • Jun 2017
    • 107
    • Lake Anna

    • Alexandria, VA

    • '05 SV211

    Clearing bow/floor drain SV211

    The drain in the bow of my '05 SV211 - doesn't. Any guesses on how to clear this drain? The round metal cover plate is not clogged, so the stoppage must be elsewhere. The drain at the driver's feet works fine. Any advice greatly appreciated.
  • MN Ryan
    1,000 Post Club Member
    • Aug 2020
    • 1250

    • Maple Grove, MN

    • 2007 SV-211 TE

    #2
    Mine drains but slowly. This is something I would like to tackle but just haven't gotten around to.

    I've thought about compressed air but don't want to blow out any hoses/connections. Otherwise, maybe threading a stiff wire through there.
    Last edited by MN Ryan; 04-08-2024, 10:29 AM.

    Comment

    • Polidori
      • Jun 2017
      • 107
      • Lake Anna

      • Alexandria, VA

      • '05 SV211

      #3
      Thanks for the tip Ryan. I’ll let you know if I have any success fixing the problem.

      Comment

      • Polidori
        • Jun 2017
        • 107
        • Lake Anna

        • Alexandria, VA

        • '05 SV211

        #4
        Problem solved. I hadn’t realized that there are two drains in the bow - one that you can see at the front of the bow in the floor, and another one underneath it but a bit closer to the bow. The top one simply drains onto the carpet under the bow seats and then goes down the second drain into the bilge. I cleared the gunk out of both drains and everything works great now.

        Comment

        • MN Ryan
          1,000 Post Club Member
          • Aug 2020
          • 1250

          • Maple Grove, MN

          • 2007 SV-211 TE

          #5
          Cool. I'll check it out--mine is hibernating for another month.

          Comment

          Working...
          X