Anyone know if the shocks in the tower of my 2021 G23 are covered under warranty? How hard to DIY replace?
X
-
I've had mine out ('16), it wasn't that big of deal. Foggy in my brain as to the process. I do remember you can adjust them by rotating once released.
I'll look around to see if I saved any pictures. Why do you feel they need replaced?
I know my tower has over a couple 100 ups & downs over the last few years, can't get in or out of the shop otherwise. They are an aid when dropping the tower, resistant when raising. Why do you feel they need replaced?
-
-
Originally posted by Scooter G View PostI've had mine out ('16), it wasn't that big of deal. Foggy in my brain as to the process. I do remember you can adjust them by rotating once released.
I'll look around to see if I saved any pictures. Why do you feel they need replaced?
I know my tower has over a couple 100 ups & downs over the last few years, can't get in or out of the shop otherwise. They are an aid when dropping the tower, resistant when raising. Why do you feel they need replaced?
Comment
-
-
The bummer is the stickers will need to come off to gain access, you may be able to get them off alive with a heat gun & patience, don't count on it. The panel are just pry Christmas tree studs.
I believe those gas shocks are spendy buggers, maybe yours just need a little adjustment. Even with the assist of the shocks those towers loaded with the speakers and the bimini are awkward heavy. I've got it down to a science, but I still have to go into 3 big breaths power lifting mode. 2 people can handle it, with or without shocks.
Good luck, chart the process if you go that direction.
You can compare the pictures above somewhat with screw access.
Comment
-
Comment