problems with computer 01 pro air

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Birddizzle05
    • Aug 2006
    • 5

    • Monticello, Georgia


    problems with computer 01 pro air

    cant get power to the key pads or control cluster no bildge no ballast all the lights will light up but nothing will work and when you hit the buttons the lights wont go off
  • Rick
    1,000 Post Club Member
    • Mar 2004
    • 1250

    • San Diego, Ca

    • 1962 Keaton Utility. 2000 Ski 1965 Barracuda

    #2
    RE: problems with computer 01 pro air

    Check the main breakers at the engine They are the red buttons at the top rear of the engine. Then check your grounds to the engine and to the breaker box. Are any of the bvreakers out? If so push them back in. Start there and If those don't fix the problem start with the positive wire starting at the solenoid. Good luck
    Nautiqueless in San Diego

    Comment

    Working...
    X