My 92 nautique is getting alot of oil residue on top of my intake manifold,it builds up just below the carb. I would appreciate any feedback.
X
-
Its pretty easy to do if you have done a holley carb before. Just remember to set your floats properly and don't forget thevent baffle to prevent fuel slosh into the carb on hard accelleration. Clean the carb in laquer thinner because it does not attack the finish. Don't try to match the carb kit to an automotive kit because it does not come up in their cataloge. The PCM part number is RN0120-1 and don't forget the base gaskets.
Comment
-
Comment