Tray for engine compartment

[apexrig1]

I seen something similar but alot fancier like this on a 220. And We usually ride early and it usually happens I get stuck with the wet cold life jacket. So this is my version!

[Mikeski]

Does it need a drain? looks great

[apexrig1]

I didn't really want water dripping over the motor all the time so I never put one in, probably just take it out and drain in once and awhile.

[core-rider]

Don't suppose you could post the dimensions of the box for the rest of us could you. I would like to build something like that as well. Good job BTW, looks great.

[Latonkaboarder]

Looks great! Did you have a fab shop bend it for you? As for the drain you could possibly put a nipple on the back side and run a piece of hose off of it to route where the water would drip to. How much did something like that cost?

[apexrig1]

Im not sure who built it actually, my boss got it made for me. I told him my idea and drew it out and he gave it to a guy he knew. Cost me 160 bucks. Yeah that probably would work good I may just do that with the hose.

[obd666]

nice job, had thought about making something like that for mine

[Gasman87]

thats pretty sweet !!! here is ours in our 220.

[Shooter]

I was thinking about doing something like this for my "old-hull" 2003, but I don't think there is enough room between the bottom of the hatch door and the top of the engine

[vvfdfirefighter]

thats pretty sweet !!! here is ours in our 220.

I know this is 6 years old but I want that steering wheel!!!!! Who made it for you?

[NautiqueJeff]

That boat was completely reworked at the Nautique factory, steering wheel included. There were many one-off custom parts added to that boat.