Keypad Bypass

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • mosh706
    • Nov 2013
    • 26

    • nj

    • 2000 pro air nautique

    #16
    I know this thread is a little old but in the picture next to your bypass there is a silver knob what is that for? I only ask because I just bought a pro air nautique and the guy I bought it off of had no clue thanks.

    Comment

    • s_kelley2000
      1,000 Post Club Member
      • Nov 2007
      • 1575
      • Fort Meadow Recevoir

      • Mass

      • 2012 Super Air Nautique 230 1999 Nautique Super Sport with 502 Python (for Sale)

      #17
      I believe that knob is used to calibrate the speedo but I am not sure. My boat is a 99 so it still has the Airguide speedo with the calibration knob on the speedo itself.
      Shawn

      2012 Blue Metal Flake SAN 230

      1999 Black and Tan Python 502 Powered Super Sport (for Sale)

      Comment

      • h2opolo
        • Apr 2013
        • 46

        • California

        • sv211

        #18
        s_kelley2000 is right. speedometer calibration. I suspect there is another calibration on the speedometer itself for larger adjustments. The silver knob is only about +-5mph.

        Comment

        • MTT1979
          • Aug 2012
          • 18

          • Virginia


          #19
          Any idea if the wiring is the same on a 02 SANTE as it is on your 01? Looks like a good mod I may try to tackle this winter. Couldnt find a wiring diagram anywhere for my boat.

          Comment

          • ag4ever
            1,000 Post Club Member
            • Feb 2004
            • 1180



            #20
            You just need to carry a couple short wires. If there is an issue, pull the relay to the pcm, fuel cell and use the jumper wires. Then use a third wire to temporarily short the wiring to the starter. Will get the boat running without gauges in an emergency.

            Comment

            Working...
            X