206 TWINS!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • OnlyNatique
    • Feb 2004
    • 84



    #16
    Dude, honestly those could be some brochure Pictures...Very nice Pictures and very nice boats!

    Comment

    • MinnesotaNautique
      • Jan 2004
      • 207



      #17
      Onthewater,

      The tower does not cause any problems w/ the boom and it's fairly easy to assemble on the water...2 minutes to attach or take off.

      Comment

      • RideRight
        • Feb 2004
        • 14

        • cedar bluff, va


        #18
        great pics !!!! i would also like to know about that boom. i have an 04 206 and am looking at booms. again great pics


        Look up God is watchin


        Ride Right

        Comment

        • MinnesotaNautique
          • Jan 2004
          • 207



          #19
          RideRight,

          The boom is made by barefoot international (it's rock solid)...there are several other good mfg's as well. Just be sure to get a boom that has a bend to it as the straight booms may not work, because of the wind-shield length.

          Comment

          • igkya
            • Oct 2003
            • 227

            • Minden, NV

            • Club boat 2005 196

            #20
            is your boom between the tower mounts or behind it?

            Comment

            • MinnesotaNautique
              • Jan 2004
              • 207



              #21
              Yes, its between the mounts (almost touching the windshield)...you can see the placement in the first picture. If it's too far back, you'll get alot of spray from the boat.

              Comment

              Working...
              X