Tweet
I'm close to pulling the trigger on a shadow top bimini. I wanted to see if anyone has owned this and if they like them.
Thank you
Sent from my SM-G986U using Tapatalk
Thank you
Sent from my SM-G986U using Tapatalk
-
-
I have owned two. They are great.
I own and operate Silver Cove Marine, which is an inboard boat restoration, service, and sales facility located in Mooresville, North Carolina. We specializes in Nautiques and Correct Crafts, and also provide general service for Nautiques fifteen years old and older.
If we can be of service to you, please contact us anytime!
Current Boats —> 2025 Super Air Nautique G23 -- 2001 Ski Nautique -- 2000 Nautique Super Sport PYTHON -- 2000 Nautique Super Sport -- 1999 Ski Nautique PYTHON-- 1985 Sea Nautique 2700 (Twin-Engine, 1 of 13) -- 1981 Fish Nautique (Twin-Engine, 1 of 4) -- 1980 Fish Nautique (Twin-Engine, 1 of 4)
Former Boats —> 2024 Super Air Nautique G23 PARAGON -- 2023 Super Air Nautique G23 -- 2022 Super Air Nautique G23 PARAGON -- 2021 Super Air Nautique G23 -- 2021 Super Air Nautique G23 -- 2020 Super Air Nautique G23 -- 2019 Super Air Nautique G23 -- 2018 Super Air Nautique G23-- 2018 SAN 210 TE -- 2017 Super Air Nautique G23 -- 2016 Super Air Nautique G23 -- 2015 Super Air Nautique G23 -- 2014 Super Air Nautique G23 -- 2014 Super Air Nautique 230 Team Edition — 2013 Super Air Nautique G23 — 2012 Super Air Nautique 210 Team Edition — 2011 Super Air Nautique 210 Team Edition — 2010 Super Air Nautique 210 Team Edition — 2008 Super Air Nautique 230 Team Edition — 2007 Air Nautique 236 Team Edition -- 2007 Air Nautique SV-211 -- 2005 SV-211 -- 2003 Super Air Nautique 210 Team Edition -- 2003 Air Nautique 226 -- 2003 Sport Nautique 216 -- 2003 Ski Nautique 196 -- 2003 Ski Nautique 196-- 2002 Ski Nautique -- 2001 Sport Nautique -- 2001 Ski Nautique -- 2000 Sport Nautique -- 1999 Ski Nautique Open Bow -- 1999 Air Tique 176 -- 1998 Ski Nautique -- 1998 Ski Nautique -- 1998 Ski Nautique -- 1997 Ski Nautique -- 1997 Ski Nautique -- 1996 Ski Nautique Open Bow -- 1994 Ski Nautique -- 1993 Barefoot Nautique -- 1983 Fish Nautique (TWIN ENGINE, 1 of 4) -- 1981 Fish Nautique (SINGLE ENGINE)
Need something for your boat? Please check out our site sponsors! Not only do they offer the best products available, they also support this site.
Silver Cove Marine - NautiqueParts.com - Phoenix Trailers - SkiSafe - PCM Marine Engines - C&S Marine - OJ Propellers -
Looks like they provide quite a bit of shade too. Nice!
Sent from my SM-G986U using Tapatalk
Comment
-
I have had one for a year also, and have had 0 issues. That being said, I did have to cut the aluminum tubes that the side ball mounts go in down. Mine is on a 05 210, and I have a "Narrow" Aviator Pro. I'm not sure if they have a "Narrow" Version of the Shadow top or not, I really didn't care, it took 5 minutes to make the cuts. Also, only 2 of my support bars fit at one time. The rear 2 were too short after installing the long front 2 bars. I actually think the front 2 bars are too short after looking at Jeff's. I let Roswell know, but they never did anything about it. I might see if I can get some longer tube from them one I get the boat out this year.
Attached FilesComment
-
-
Good feedback. I've looked at quite a few and it looks like the front tube are maybe a smidgen too short. Thanks for the info!
Makes me feel more confident about buying.
Sent from my SM-G986U using Tapatalk
Comment
-
I have the same Ronix surf board.Originally posted by Stevemo14 View PostI have had one for a year also, and have had 0 issues. That being said, I did have to cut the aluminum tubes that the side ball mounts go in down. Mine is on a 05 210, and I have a "Narrow" Aviator Pro. I'm not sure if they have a "Narrow" Version of the Shadow top or not, I really didn't care, it took 5 minutes to make the cuts. Also, only 2 of my support bars fit at one time. The rear 2 were too short after installing the long front 2 bars. I actually think the front 2 bars are too short after looking at Jeff's. I let Roswell know, but they never did anything about it. I might see if I can get some longer tube from them one I get the boat out this year.
Comment
-
Steve is there a slit down the middle? Do you have a photo from underneath looking up at it?Originally posted by Stevemo14 View PostI have had one for a year also, and have had 0 issues. That being said, I did have to cut the aluminum tubes that the side ball mounts go in down. Mine is on a 05 210, and I have a "Narrow" Aviator Pro. I'm not sure if they have a "Narrow" Version of the Shadow top or not, I really didn't care, it took 5 minutes to make the cuts. Also, only 2 of my support bars fit at one time. The rear 2 were too short after installing the long front 2 bars. I actually think the front 2 bars are too short after looking at Jeff's. I let Roswell know, but they never did anything about it. I might see if I can get some longer tube from them one I get the boat out this year.
Sent from my SM-G986U using Tapatalk
Comment
-
The center section has a "Zip Out" portion. I left it out most of the summer.
I hope those help show it to you .Comment
-
Thank you. What's it for? Allow to walk through? Benefit of keeping it open?
Sent from my SM-G986U using Tapatalk
Comment
-
It helps with walk through, and also with detaching the support bars if you need to fold your tower. It also can let some sun in the center if you want that.Comment
-
Do these fit the FCT5 tower? Does it fold up quickly? I have a 2011 230 Team Edition. Roswell has one for $999 (it is the last one and has a bit of wear on it).Comment
-
It doesn't fold, but it tilts. you take the pins out of the front and rear bars and it will tilt on the center point. You only need to do that when folding the tower. If you are trailering its just easier to take the cover off and leave the frame attached with the bars. I have towed it up to 50 mph with the fabric on for a few miles and had no issues, but would do it for more than that, or faster either.Comment
Comment