Tower Bimini

[KONAKING]

I had problems installing the Tower Bimini on the new Titan tower also. The measurements were off and I had to tweak everything. Since I trailer mine every trip, I had to tighten mine down very tight so it wouldn't flap going 70 down the highway. I had to screw bolts in the front slide mounts because the micro digger screws didn't cut it.

You top actually holds up going down the freeway ? I had one fold on me at 50 mph

[kevfran99]

Do you guys have the same problem with the flight control tower???? Or are the directions correct for that one?

[Nautiquehunter]

I talked to my dealer he said the measurements are just a starting point for all towers.
Put all the clamps on but don't tighten all the way once its all installed then move them as needed to make it work.
My problem was trying to make it work with the given measurements.
Once I stopped using them it went fairly quick.

[BPSKI]

Use the measurments for a guide only, it will take tweaking after the bimini is on. The FCT will likely take some adjustments also. In response to trailering with it, It only takes about 2 min to fold it up from start to finish. I would not chance it.

[Nautiquehunter]

BPSKI
Its nice to see another Nautique in NW Indiana what lake do you go to ?

[BPSKI]

I mainly go to Culver due to depth issues at bass, I also have access to a private lake, but my time there is limited. See my comments in the thread were the guy was not getting his boat shipped about a spot you may want to try early season.

[aarond0083]

Nautiquehunter, can you e-mail me some details pictures of where you mounted all the clamps? I have the exact same bimini to put on my 210 with Titan and that would save me some time.

Looks great btw, I went with all black too.