Surf Board Racks for FCT?

[HS]

I am looking for a surfboard rack to attach onto my FCT. I have seen the Fly High Pro X series http://fatsac.servehttp.com/FlyHigh/...oducts.html#14
What do you guys use to store the surf boards while Riding WB?

I have one IS Blue Lake and one IS Black Pearl (skim).(For now they ride in the bow).


Thanks

[jhiestand]

I use a Monster! wakesurfer rack if we decide to haul the surfer along. The only kicker is you'd likely need a couple of them to accommodate both of your boards. We don't always take surfboards along so it works well for us that it's removeable.

http://shop.monstertower.com/c-4-tower-racks.aspx

[Mikeski]

Why don't you just strap them to the top?

[HS]

I did bungee them, but thought a WB line might get hung up. Is a bungee what you used in this photo?

[jc]

I know Roswell just released surf racks, and they have a few different options for mounting, swivels etc.
Check them out www.roswellwakeair.com

[jasonba1]

If you are wanting the monster surf rack Jim Jackson at Viper customs has some that are cheaper than monsters his number is 865-388-4096 make sure you tell him you saw it on this site.

[Mikeski]

Yep, bungee cords in blue to match the boat... From the local hardware store, they hold the boards surprisingly tight, definately on there better than when I put them in the flight clips (with bungee extensions). Never had any issue with them touching the wakeboard line.

[tmb]

I have surf forks from titan that replace the forks on the spinner racks. it was much cheaper to buy the forks than a whole new rack if you can devote 1 whole rack to surfing. I sold the boat they go to and was getting ready to list them in the classifieds. Let me know if you are interested.

[nautique06]

I may be interested...I have a 2006 220 with spinner racks....would what you have work?

[mf01]

Yep, bungee cords in blue to match the boat... From the local hardware store, they hold the boards surprisingly tight, definately on there better than when I put them in the flight clips (with bungee extensions). Never had any issue with them touching the wakeboard line.

What size bungee cords did you buy? Does the bungee or board mar the surface of the tower?

[tmb]

They should work. You just unscrew your wakeboard forks and screw these on in their place with the same screws. Attached is the image of the forks. I bought them last July. I think they are the cruiser model. http://www.titanwake.com/category/pr...wakesurf-racks

[Leeroy]

send me a cost?