Big Air Flag Holder

[Tbriggs]

Can anyone tell me what size clamp to order for the Big Air Flag Holder? The clamp options at 1.5”, 2.5” and 3”. My boat is stored 2 hours away so I can measure the tubing. I have a 2017 Super Air Nautique G25. Also, if there is a better flag holder option I’d like to hear it. Thanks

[GMLIII]

We have a 2017 G23 and have a Big Air flag holder . I don’t recall the size I got but thinking it was the 3 inch . Product comes with rubber shims so it too big you can add shims . Top quality product .

[Scooter G]

I have been thinking about adding one of those. Let us know how it works out for you. GMLIII, looks like you are getting good use out of yours (love the pic).

[MN Ryan]

I can't speak to your tubing diameter, but they're very nice and solid flag holders!

[Scooter G]

I'll run a mic on my tower this eve...

[GMLIII]

Scooter G Had Big Air flag holder for 4 years now works great. Great quality product.

[Scooter G]

Are ya'll running the Big Air stainless flag pole (I think it's 7/8") or doing your own thing?

[MN Ryan]

Own thing. For smaller flags, I just bought a section of 7/8" aluminum pipe at the hardware store.

[GMLIII]

I used the Taylor Made product below. Even though the flag pole is only 3/4 inch in diameter, I used the rubber shimes provided by Big Air with the flag holder to fill in the gaps where the pole goes into the holder.

Taylor Made Products 916 Aluminum Boat 3/4-Inch Flag Pole With Charlevoix Clips (24-Inch) Taylor Made Products 916 Aluminum Boat 3/4-Inch Flag Pole With Charlevoix Clips (24-Inch)

[Scooter G]

I ran a measurement pass on the tower ('16 G23 - Upgraded not by choice Tower), came in a tad under 2 1/2". Registered a 2.36 to 2.45". Should be good to go @ 2 1/2'.

[Scooter G]

It's like Christmas in July sitting in the mail box today.