Feedback for Connelly Draft bindings

[lakeaustinskier]

Does anyone have feedback about the Connelly Draft bindings?

I currently ski on a D3 with Driver bindings and although they are okay, the laces tend to only tighten on the top of the boot (and not the bottom).

It's my understanding that the Draft hole patterns will fit D3.

Also do they run "true" to size - or large or small?

Thanks!

[jjackkrash]

I like my Draft bindings. They are easy to get into and very snug and comfortable. And you can release the pressure while sitting in the water between sets with the flip of a switch. I used to run conventional double high wraps that were very, very tight and cramping was an issue. The Draft bindings seemed to cure this problem with at least the same support.

I don't know the answer to the last two questions, but you can call H2Osmosis and ask to speak with a waterskier-sales person. They are pretty knowedgable about the equiptment they sell.

http://www.h2osmosis.com/

[lakeaustinskier]

Thanks for the feedback. I'll call H2O.