going from a CDM1 to a CDM4. where can i get a bracket?

[airhuck]

i have a 2001 SAN. i just took my CDM1 out and put a CDM4 in its place. they dont match up. anyone know where i can get a bracket to cover the old holes?

[airhuck]

RE: going from a CDM1 to a CDM4. where can i get a bracket?

sorry, its actually an clarion XMD1 adn i jsut got a clarion CDM4

[Sinkoumn]

RE: going from a CDM1 to a CDM4. where can i get a bracket?

You might just be better off getting your own laminate and just making your own cover for the holes.

Just take the head unit off, mark the hole locations, drill em; then cut an arbitrary sized distance outside of the head-unit casing.

[bchesley]

RE: going from a CDM1 to a CDM4. where can i get a bracket?

clarion makes an adapter plate. I used on in my SS. My dealer keeps them in stock. Super easy to use.....

[geoffc210]

I upgraded from the XMD1 to the CMD5 using the Clarion adapter plate. Very easy to use, however, the existing hole from the XMD1 was too high for the larger CMD5. I had to modify the glove box cover so that it would fit. I am not sure about the CMD4, but you might want to check this.

The cover was the easiest thing to modify in my opinion.

Good luck

[airhuck]

thanks for the respnses! anyone know where to get this adapter online? i checked crutchfield and they didnt carry it.

[fbascom]

Search for this Clarion CMD4 Retro-Fit Adapter

[geoffc210]

mine came from my dealer

[airhuck]

FYI, its part # CM-adap-R . i got mine from BOE- 866.735.5926

[jward]

thinking about getting the same head unit. I have a 2003 SANTE does this unit work with the wire remote mounted in the dash. Spoke with crutchfield and they said it did. I was also wondering if I will have the same problems with the glove box insall

[airhuck]

my dash remote works w/ the CDM4. i picked up my CDM4 for $79 on ebay w/ free shipping. cant beat that.