New White LEDs

[Mikeski]

First shot of my boat with White LEDs, courtesy of Walt off wakeworld. The white LEDs are much brighter than the blue ones were. It's almost to the point of being obnoxious but it's nice because it lights up everything around my boat like daylight.

It has about 25' of LED tape, 6' of waterproof tape, and 4 lightbars under the platform. Tape around the 4 Wetsounds 8" speakers, tape under acrylic rings around each of the 10 cupholders, 3 LEDs in each of the 5 factory light pucks, 3' of waterproof tape inside the cooler, in addition to the blue I left behind the factory vents.

[Andrew]

RE: New White LEDs

that looks great!

[BP22]

Looks sweet Mike!

[Miljack]

Mike,
that looks great! Where did you get the light bars? Other colors available?

thanks,

[Mikeski]

My lightbars came directly from China (I have some connections). You should be able to find similar light bars or pucks from a few online sources, maybe oznium.com, besthongkong.com, or superbrightleds.com.

[noti_dad]

How did you wire the platform lights? Can the pucks or tape be wired directly tothe existing wiring or s there some other work you need to do?

btw that looks REALLY nice.

[Mikeski]

LEDs draw very little power, you can easily add all of them to the accessory light circuit. I think all of mine only draw 4 amps. The platform wires come out from under the rub rail and go under my the transom pad I have added below the rub rail above the platform.

thanks for the compliment

[nautique95]

Very Nice! Looks great reflecting off the water!

[Grant_West]

Yea the White LED looked awesome. I was very impressed with the underwater (swim deck ones) the white light from the LED's would light up the bottom of the lake near the shore line 5-6 feet of water No problem. It was cool to look down and see the bottom at night.