Alpine pdx 4.150 & wetsounds pro60

[tmb]

I am replacing my clarion amp with the alpine pdx 4.150 to drive my 2 Pro 60's. I am inexperienced with this so can someone please tell me if I need to and how I bridge this amp correctly. Do I select the "1+2/3+4" to bridge it?

Also, where and how did you guys mount this amp?

Thanks

[tmb]

RE: Alpine pdx 4.150 & wetsounds pro60

I figured out how to mount it now I just need to know if/how to set the input to bridge it. Thanks

[BP22]

I am in the process of installing two Pro 80s with the PDX 4.150. Here's some info I have gathered.

http://www.planetnautique.com/index....ic&t=11491

input channel switch to 1/2
put positive from left speak into the positive side of the connector for CH1 on amp, negative from left speaker to negative side of connector for CH2, right + CH 3 right - CH4.

I have a PDX 4.100 I am running for the cabin speakers and I am adding the 4.150 for the Pro 80s. Both will be mounted under the love seat to the factory installed "humps".

[tmb]

I am not impressed with this amp at all. With the speakers bridged I can still turn the gain all the way up and it's not extremely loud. I talked with the guys at wetsounds and alpine and they seem to think everything is connected correctly.

Anyone else having these issues?