Those of you with LED's...how did you run wiring?

[flaudia402]

I'm just curious about how you ran wiring for the LED's. I'm not so concerned with the cupholder ones, or the speaker ones since those can be concealed in the tower or in the boats storage. What I'm curious about is the under the swimdeck lighting. Where did you run the wiring to get to your power source?

[Mikeski]

RE: Those of you with LED

tower, 22ga speaker wire in a loom with the other wires (or just hook on to the anchor light wiring).

swimdeck, my wires come from under the rub rail then run under the protection pad on my transom, the 211 rub rail is very low in the back. I drilled a hole under the rub rail. I would have no issue drilling a hole just above the swim deck bracket on a boat with a high rub rail. Drill the hole a bit oversized so you can get a good bead of sealant around the wire.

power source is my stock accessory lighting, LEDs draw very little current.