Tower Wire

[fitzee]

is 12 awg(is that stand for the gauge of wire) stinger oxygen free speaker wire okay to use to wire my tower speakers

can i run 1 set of 2 wire to run 4 speakers there is spearate hook up on each polk speaker or should i run 1 set of 2 wire per speaker

[AuMDLST]

RE: Tower Wire

are you going to run the 4 speakers in parallel or series?

[Mikeski]

RE: Tower Wire

I would recommend running a single bundle with 4 wires, minimum 14ga.

Here is what I use most of the time: http://www.audiopile.net/products/Sp...cutsheet_2.asp

25' of this and you will have wire to spare. If you don't need the ends for NVS, Wetsounds, or other, they can sell you just the cable. They also have the wire in 11ga. In my boat with 500 watts x 2 going to the tower I run the 11 ga wire.

[fitzee]

mikeski can you get connectors to hook that wire up on the speakers or what do i need to hook up 4 polk audio tower speakers with speakers all have there own hookup (8 hook up )and i'm using one clarion 4 channel so how is the best way to do this
thanks

[Mikeski]

Four - 4 ohm Polks:
Wire the speakers together in series pairs, bridge the four channel amp into two channels.

www.bcae1.com

[fitzee]

what kind of connectors do you use on the tower speakers

[Mikeski]

My wetsounds use Neutrik connectors.

[fitzee]

can you put those quick connect on polk speakers

[Mikeski]

If you want to disconnect the polks I would do it like this:

http://www.wakeworld.com/MB/Discus/m...21/221331.html