Wetsounds install

[wetsounds1]

Wow, your first install!! Very very nice. I would have thought you have done a ton of installs as everything is clean and simple. Amp rack is a great idea.

Make sure to e mail me the finsihed pics.

And everyone else, send me your pics to twhite@wetsounds.com

we will get your boat up on the Nautique gallery.

Tim
Wet Sounds

[gride300]

there is no way i could make anything clean like that, but your install makes me want to rip out everything and have it done just like that.

[xrichard]

Thanks for the compliments.

And HUGE props to Tim and crew at Wetsounds. I had a lot of questions and always got quick and detailed responses whether I contacted them by email or phone.

Tim--I'll take some better photos once I finish with the tower speakers and send them to you.

[gride300]

i want to see the amp rack hinged down showing all those shiny syn amplifers.

[xrichard]

:-) I'm rethinking how I have it hinged. Right now there are two hinges on the left and two supports on the right. I didn't attach the rack to the fiberglass panel at the walkthru (on the right) because I was afraid of the potential for cracks developing down the road. Right now, dropping the amp rack requires requires a bit of work--I have to pull the sub out (which is attached to the floor), then take out six screws holding the supports in place on the right. I also don't like how I made the support post follow the angle of the passenger walk through--it looks a bit off because it is not vertical (e.g. in line with the side of the sub)...instead it angles in line with the inside of the walkthrough.

[gride300]

i was picturing it sliding towards the stern a little and then angling down exposing the whole amp, while the sub is still there, etc. basically an amp droor that tilts down.