Factory Interior Accent Light LED Upgrade

[tadelfio]

RE: 112.5 degrees

yeaaaa.... I'm not sure of the legality of that one. Sorry, but me personally, I would have to keep the "normal" bow light on there to keep from getting stopped.

[wake4life6]

RE: 112.5 degrees

any pics of the interior 2004196

[swancer]

Re: Super Bright

http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fspecs%2FSMD _LED_tube.htm

swancer - follow the link above- I have the 7" & 12"
on my boat (blue) and they both are plenty bright - very nice quality for the buck. Where are you placing them? - I used 12" in the side gunnels for interior light and 7" in the vent screens in the back of the boat for a little accent. Replaced the coast guard red/green navigation light on the bow and put a 7" red (port) and a 7" green (starboard) in the front scoop areas just under the front windshield for the navigation lights. Can post a few pics if anyone is interested.

Did you use the factory wiring and switches that are in place? In other words are these lights plug and play?

[2004196]

LED's

They are plug and play, hooked directly to exisiting wiring from the factory switch in the keypad assembly. Very quick and easy hook up and can return to stock set up just as quick.

Wake4life6 - will try and get a couple interior shots up this weekend, where do you spend most your time on the water?

[2004196]

Interior shots

Here's a couple of pics of the blue LED interior lights, one under the steering wheel area and one of the side gunnel area.

[SuperDave]

RE: Interior shots

Looks great.. what size did you use and where..

[2004196]

Interior

7" under the front dash mounted to the metal bar and 12" under each side gunnel, easy conversion on the sides.

[Xtremeskierbfs]

7" under the front dash mounted to the metal bar and 12" under each side gunnel, easy conversion on the sides.

So this is literally as simple as mounting them up in the gunnell and then running the wiring back to the keyad? How do they wire into the keypad for proper integration with the lighting button?

ELI5 please because I am not an electrician!