Tweet
you get your boat back from the stereo shop only to find out they are retarded and lazy. I gave these guys the syn 6 manual, pro 80 manual, all the wiring diagrams from correct craft, a list of what i needed done, and did a walk through the boat also. first i got to relocate the fuse holder, then i got to rewire the tower speakers and adjust all the buttons on the syn 6. tomorrow i get to double check the wiring for the in boats along with the buttons on the other syn 6. i also go to mount a crossover and relocate some rca's. just labor i spent about $500.00. I straight up told the guys to pay attention, do quality control, and test everything. how much more idiot proof can it get? if i had a covered work space i'd have done it myself and from now on i will. alls i wanted to do was support a local shop, get my stereo working without losing 15lbs from sweating, and possibly help create a new wet sounds dealer. it sucks that i can't vouch for this shop. they all seem like good guys who take pride in their work, but the results beg to differ.
-
-
now that the pro 80's are wired correctly on the syn 6 and 420 they scream w/o the gains on the amp even turned up at all. 420 gains are at approximately 3/4 and volume knob @ half; head unit at 28. -
I just went through that exact experience. Had a friend reset all my gains this past weekend and now I have to move fuses off the floor before they end up under water and secure wires that might end up underwater as well. They also modified my amp board that I specially ordered with a Cnc machined edge that now has a sharp 90 degree angle pressing into my front ballast sac because they couldn't figure our how to make it fit. I could keep goin on...Comment
Comment