Multiple RCA's...best way to handle

[crghou]

I need 5 RCA outputs for my amps. I was using Y's but they seem to be going me static through the speakers. What are my other options. Not trying to break the bank either. My head unit only has 3 outputs as well.

Thanks

[AirTool]

I used these indoors for years and they worked great. Not sure if it helps you.

[crghou]

What is it? Sorry don't see a link

[gride]

Your h/u has 3 pairs? What Amps are you using and what speakers?

[AirTool]

What is it? Sorry don't see a link

http://www.radioshack.com/product/in...ductId=3450791

[RideButter]

Do your amps have a pass through? What is your setup how many amps for what. I'm running 4 2 for the tower 1 for interior and one for sub. I use a ws420 to drive it all but still only have 3 outputs. So I use the pass through from one tower amp to the next.

[crghou]

I might need to go back and read through the manual's again but I was under the impression they did not have pass through. I am running the JL audio M660, 4 channels are running my 4 interior speakers db651's, the front bow speakers are just pulling in off the head unit. Channel 5&6 are bridged of the JL660 for my sub. My tower speakers (Pros 80's) are running off the stock kicker KX300.4 which is bridged to run each speaker on 2 channels.

And yes my clarion head unit only has 3 RCA outputs.

[RideButter]

I have the amps and tower speakers and interior only off of 2 channels each. The amps have a button for 2 channel mode, not sure about yours. So if I was just running head unit, it would be front pair to interior, rear pair to tower, and sub out to sub amp.

Hope this helps.

[crghou]

Yeah sounds like I can run only 2 channels on my jl amp. Kicker I thinks needs 2 channels so that still puts me at 4 channels. Might try out a clarion equalizer.