Adding Amp to CMD4

[SKIER206]

The wiring diragram does not spell it out very well and i am not very tech savy. so I am looking for some lay out to wire this up I have run the power and ground then i am lost with the rca cables and other wires. any help would be great. P.S. It is a SN206 with factory head unit. Thanks

[lucky7t]

You should be able to just simply run an rca patch cable to your amp.If both rca cables are used already then you will need 2 y connectors l


Heres link to install manual
http://www.clarion.com/us/en/support...ll%29,0.pdf%27

Heres link to owners manual
http://www.clarion.com/us/en/support...al%29,0.pdf%27

Good luck

[SKIER206]

Thanks for the links.
I got it hooked up and it sounds great but the bow speakers now don't work the amp is a JL Audio JX 360x4, I hooked both RCA cables up one to the front and one to the rear and I am not sure where the bow speaker wires are and where to hook them up to? there are speaker hook ups that are not RCA style can I find the wires for the bow speakers and just hook them to that?

Thanks for your help.

[lucky7t]

Yes your front speakers are not amplified from the factory. You will need to run those to your amp.

I don't remember what color they were in my older boat but do a search for front speaker wire color and the year of your nautique.

[lucky7t]

what year is your boat?
I see its a SN206 with a CMD4 but what year. Maybe i can help with speaker wire colors for you