I have all Clarion radio control equipment in my boat (Im guessing its the factory stuff) but for some reason the guy that had it before me put a kenwood deck in it. Now neither my swim deck controls or my controls by the steering wheel work. I was told I cant use my remotes with the new Clarion decks does anyone know if this is right or are they trying to get me to buy new remotes in all? and if this is so does anyone have and old Clarion deck (Pre 2009) that they would wanna get rid of?
X
-
Those work with a Clarion CMD5 or older source units. They will not work with a CMD6 and newer Clarion source units. Our Earmark site store lists the source unit compatibility for all the Clarion remotes. Just visually identify your remote and read the text. Like mentioned above, if you change out to the newer remotes you must also change out the connecting 24 ft cables and the Y adapters.
David
Earmark MarineEarmark Marine[URL="http://www.earmarkmarine.com"]
www.earmarkmarine.com[/URL]
Comment
-
-
Originally posted by EarmarkMarine View PostThose work with a Clarion CMD5 or older source units. They will not work with a CMD6 and newer Clarion source units. Our Earmark site store lists the source unit compatibility for all the Clarion remotes. Just visually identify your remote and read the text. Like mentioned above, if you change out to the newer remotes you must also change out the connecting 24 ft cables and the Y adapters.
David
Earmark Marine
Comment
-
-
Aqua,
Sorry. Checked high and low. No remaining CMD5, XMD or older DIN-sized HUs that will work with your existing remotes. These units have been discontinued long enough that even refurbished units are a poor option. So the used market is about it.
David
Earmark MarineEarmark Marine[URL="http://www.earmarkmarine.com"]
www.earmarkmarine.com[/URL]
Comment
-
Comment