So everythin has been fine until today. The receiver turns on fine and appears normal. As does the 420 and each wet sounds amp. I checked all rca's also. No output whatsoever from any source. 1 of the tower and inboat outputs on the 420 were already bad so I'm thinking the others just bit the dust. It's from the 1st run of 420's. So basically everything is on but no sound
X
-
Reed,
With a female to female RCA barrel connector you can easily circumvent the EQ and verify you have a signal coming from the HU and fully functional amplifiers.
High impedance headphones with an RCA to 3.5mm adapter will allow you to safely check the EQ output. Or, with a multimeter you can check for an AC voltage at the output of the EQ.
David
Earmark MarineEarmark Marine[URL="http://www.earmarkmarine.com"]
www.earmarkmarine.com[/URL]
-
Comment