Tweet
I am doing an audio overhaul over the winter. I want to replace all of my interior speakers with POLK MM 6.5s. Does anyone have any guidance or step-by-step pics or anything like that to help me out on this project?!?! I have heard you have to take the side pieces off because the factory speakers are mounted from the back. Please Help!
-
-
I will say that you should go kicker or wetsounds over polk. -
If your boat has the cloth like covers over the speakers you can cut that out from the outside, staying inside the piping and you will be able to access the screws that are holding the clarions in place. I installed Polk's in my last nautique and they were a definite improvement over the factory clarions. It was a pretty basic remove and re -install.2005 Ski Nautique 206 SE, Acme 422, PP SG 8.0, ND Tower
2011 strada with strada bindings
Prior Boats:
1986 Sunbird skier with 150 Evinrude VRO
1992 Mastercraft prostar 190, with Powerslot
1999 Ski Nautique GT-40
1999 Sport Nautique, GT-40 FCT,
www.skiersofknoxville.orgComment
-
I forgot to mention that its an easy change out as long as you front load the new speakers.2005 Ski Nautique 206 SE, Acme 422, PP SG 8.0, ND Tower
2011 strada with strada bindings
Prior Boats:
1986 Sunbird skier with 150 Evinrude VRO
1992 Mastercraft prostar 190, with Powerslot
1999 Ski Nautique GT-40
1999 Sport Nautique, GT-40 FCT,
www.skiersofknoxville.orgComment
-
Thanks for the advice NCH2oski! You know where I can find install pics at?!?Comment
-
Some pics in these threads of front mounted speakers in a 216.
http://www.planetnautique.com/vb3/sh...3-air-nautique
http://www.planetnautique.com/vb3/sh...ern-CaliforniaComment
Comment