cmd7 clarion speakers 2012 (polk) 200 ski nautique

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • laurie8888
    • Dec 2011
    • 162

    • dubai

    • nautique 206 and 200

    cmd7 clarion speakers 2012 (polk) 200 ski nautique

    bow speakers not working and one set rear speakers not working. checked all connections on speakers ok and nothing loose on back of main unit. is there some sort of fuse may have blown if so where is the fuse for speakers any help appreciated thanks
  • gunford
    • Feb 2011
    • 11

    • Okotoks

    • 2009 Crossover 216V

    #2
    I had this happen and it was a bad audio plug. If I plugged into the one near head unit all speakers work if I plugged in near the driver not all speakers work.

    Comment

    • laurie8888
      • Dec 2011
      • 162

      • dubai

      • nautique 206 and 200

      #3
      thanks Gunford- could you pls give me some more details (or pics) I have no idea when it comes to stereos , electronics what is the audio plug? I have a large oblong 16 pin connection into back of my head unit and numerous connectors presumably going to speakers

      Comment

      • DJH
        • Jan 2011
        • 119

        • Overland Park, KS

        • 2011 SANTE 230 Coastal Edition - April 2011 to now 2006 Ski Nautique 196 Limited - February 2007 to March 2011

        #4
        Laurie-

        You need to find your installation manual for your stereo... There should be a diagram like the one I've attached - this is for a CMD6 and may actually be the same for the 7. To check the speakers and the wiring disconnect one of the known good speakers at the RCA connectors on the speaker header and try connecting each of the "bad" speakers to the system through this channel. If they work when connected the problem is in the head unit somewhere. If they don't work the issue is with the wiring or the speakers.

        Click image for larger version

Name:	image.jpg
Views:	1
Size:	91.0 KB
ID:	366926
        Derald

        2011 SANTE 230 CE (April 2011 - now)
        2006 SN 196 LE (February 2007 - March 2011)

        Comment

        • laurie8888
          • Dec 2011
          • 162

          • dubai

          • nautique 206 and 200

          #5
          thanks to clarify I disconnect the 2 connections from back of good speaker (RCA Connectors??) and connect to the back of the bad speaker?

          Comment

          • DJH
            • Jan 2011
            • 119

            • Overland Park, KS

            • 2011 SANTE 230 Coastal Edition - April 2011 to now 2006 Ski Nautique 196 Limited - February 2007 to March 2011

            #6
            If you have an amp, disconnect the wiring for a good speaker at the amp and connect the wiring going to a bad speaker. You shouldn't have to disconnect anything from the back of the speaker itself. If you don't have an amp the speaker wiring should be connected to the 16 pin speaker connector... disconnect there.
            Derald

            2011 SANTE 230 CE (April 2011 - now)
            2006 SN 196 LE (February 2007 - March 2011)

            Comment

            • laurie8888
              • Dec 2011
              • 162

              • dubai

              • nautique 206 and 200

              #7
              ok I connected the bad speakers to the one good speakers wiring and they didn't work. I connected the one good speaker to the bad speakers wiring and the speaker worked therefore I assume I have 5 five bad speakers.....unbelievable for a 12 month old boat...speakers are polk MM 651 UM.....Boat is stored on water at extreme high temps 110 F, But even so they should last longer

              Comment

              Working...
              X