looking for these

[mr_454ss]

If anyone knows were I can find this setup please let me know thanks

[swatguy]

Those speakers are no longer produced and haven't been for some time. You can't even use the old grilles on the new style because the tweeter is mounted different. Are you needing the housing and speakers ?

[mr_454ss]

I just like the housing not to worried about the speakers

[Tryathlete]

Those Polks look like the ones I just bought from Scarbs. Are they UM651MM's?


Sooner or later your toys own you

[mr_454ss]

Not sure about those speakers. I'm just looking for a tower speaker setup. I saw this picture and liked the way it looked.

[a0128]

Not sure what your budget is, but you will get MUCH better sound from a pair of Wet Sounds REV8's.I have a pair and they absolutely kill it at wake board distances. The sound is extremely clear and the music is well defined. Everybody who gets pulled behind my boat can't believe how great they sound.

[mr_454ss]

Its looking like I will have to go that route. I just liked the clean factory look. Could you send a picture of your setup?

[a0128]

Its looking like I will have to go that route. I just liked the clean factory look. Could you send a picture of your setup?

Here are a couple.

[Tallredrider]

It would not be too hard to even have a local machinist make you a faceplate like that to essentially mate a pair of REV10's or 8's together. That logo in the middle looks boss. You would just want to verify the spacing on your tower to be sure it would fit. I suspect that they could do that in Alluminum for $150. You would then just need longer bolts on the face of your wetsounds speakers to hold the grills in place and the faceplate. A little creativity and you could get what you want.

[nautiques4life]

I had that setup... having owned it, I wouldn't search too hard for it- sound is just okay and it is really heavy, think over the years it actually took a toll on my tower (I had 3 of them (6x6.5) my previous set up of 4 6x9's was way better) and folding that tower down took a body builder or a team to get it down and up safely.