Wetsounds Rev10 clamps for Roswell tower

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • HVL2010
    • Jan 2010
    • 138

    • Cincinnati, Oh

    • 2007 Malibu VTX

    Wetsounds Rev10 clamps for Roswell tower

    I just bought a 2017 and I have Rev 10's from my old Malibu. Obviously requires a different mount. I do have the factory tower prep for speakers, so I am looking to see what I need to order to mount these to the tower in the "correct" location. Photos would be appreciated, part #'s too.
  • MLA
    1,000 Post Club Member
    • Dec 2009
    • 1312

    • Lake Wylie NC Area


    #2
    Unless the 2017 tower has changed at the speaker mounting points, this is what you need I believe. Im guessing your current pods are the X-Mount coming off a malibu? If so, nothing needed there.

    https://wetsounds.com/cgi-bin/shoppe...=WSACNAT-FC5-U

    Comment

    • HVL2010
      • Jan 2010
      • 138

      • Cincinnati, Oh

      • 2007 Malibu VTX

      #3
      Thanks. Old tower was the illusion from 2007. I have some "plates" that mount to the tower and the speaker. I bought them a few months ago, along with a 420 and and AMP and wiring kit, and was going to install over the winter. I did not anticipate that I would be buying a GS20 or that my wife would be on board. Its a long wait!

      Comment

      Working...
      X