Replacing polk system on 2010 SANTE 210

[mccurdy21]

Trying to work through this system that we have and update everything. Have already replaced the polk in boats (3 pair) with Wetsounds XS-650-S. Now looking to replace the AMPs. Want to keep this relatively economical. Have been going over whether to get 2 6 channel HTX 6, but that puts me at a grand just for the amps. Or go with 2 MB Quart 6 channels, they can be had for under 200 on amazon right now and to get us up and running, it seems like a "cheap" upgrade.

Configuration would be 1 6 channel to drive the 6 in boats.

1 6 channel bridged to drive 2 tower speakers and 1 sub. The 2 tower speakers are also the polk 6.5 MM's(?). I tried to stuff a wetsounds 650 in there but the bracket that fits in the can seems to be custom for the polk. I think I will just keep the polks for now and upgrade the tower speakers later...

What are your thoughts?

[MLA]

Im guessing your woofer is a 4 ohm?

Id suggest an HTX-6 for the in-boats and woofer and HTX-2 for the tower. Or an HTX-6 for the in-boats and and HTX-4 for the woofer and towers.

or

Kicker KXM800.5 for in-boats and woofer and KXM400.4 for the towers.