Amp signal wire from factory clarion 2011 Sport 200

[surroundsound64]

I took delivery of the 200v today via a friend who picked it up for me. It appears a sub and who knows what else was ripped out of the bow and now I have no sound. The remote head unit comes on and I'm getting 12V to both amps but the amps don't come on. Im not getting power at the terminal for the trigger wire and ran that wire back and found the picture below. The blue wire is the trigger wire. Does anyone know if it attached to the plug also in the picture with all of the cut wires? And if not, what does it attach to coming out of the actual head unit?

thanks for the help!

[MLA]

The round plug looks like a clarion wired remote extension cable that would plug into a clarion head unit. The blue wire would likely connect to the same head unit's blue/white remote turn-on output.

[surroundsound64]

The remote mounted faceplate/head unit/ whatever you want to call it only has one wire coming out of it. It runs to the actual head unit that's mounted under the bow. It is a similar looking black wire and plug and is connected to the actual head unit. The black plug picture runs over towards the amps

[surroundsound64]

Figured it out. Just kept ringing wires and it looks like it goes to the pin between the yellow and black wires in the white harness.

Thanks for for your input, MLA