SD6 to rev3som?

[G25 Bruiser]

anyone have this set up? Wetsounds sd6 hooked up to the wetsounds Rev 3som?

[MLA]

Been running it for a few years now. Doesnt get much better then this. One amp does it all with only a single pair of RCA and cabling.

[G25 Bruiser]

This is good to know, I called wetsounds and they recommended not to run that much power to the rev 3som. That's running bridged 585 x 3. Seems to me the best combo, vs running 4 rev10s. Am I right? Or wrong?

[MLA]

"I called wetsounds and they recommended not to run that much power to the rev 3som."

In the case of the rev-10, this would be a true statement. However, the amp is not all 585 or nothing. Tuned correctly, its perfect. In the case of the rev-410, 600W rms is PERFECT. Going further, you would likely not even unleash the full 600 to the 410 as you would want to gain match the 410 to the rev-10's and you likely reach that before peaking at the 600W rms.

Sounds quality wise, if we can mount the 3-some, ill take it over 2 pair of rev-10. If we can mount two rev-410, ill take that over the 3-some.

[G25 Bruiser]

Is there anyone on here that can confirm if the rev 3som will fit on a 17 g25 tower?

[MLA]

it will take a fabricated bracket to mount the 410 in the center.

[G25 Bruiser]

I thought I read on here someone mounted a 410 using the swivel clamps? I believe it was on a 2015 g... he was having trouble mounting bc of the Bimini.