Audio help - 2006 210

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 210Luke
    • Jun 2017
    • 69

    • Carthage, TN

    • 2006 Super Air Nautique 210 TE
    #1

    Audio help - 2006 210

    So I recently bout a Wet Sounds Syn 6 amp, XS 12” sub, some Rev10 tower speakers, and going to buy a Syn 2 amp for my 2006 Nautique 210. I’m having trouble deciding how and where to mount my amps.

    Was hoping someone would have some ideas or experience with this and what locations they used. Also was hoping to see some pictures if possible.


    Sent from my iPhone using PLT Nautique
    Tags: None
  • MLA
    1,000 Post Club Member
    • Dec 2009
    • 1312

    • Lake Wylie NC Area

    #2
    Outside wall, port mid-ship locker. IIRC, nautique glassed in a board there, for the factory amp. If not, then it was a model year or two later. Either way, its a great place. Just may have to attach a board or standoffs to the wall, under the carpet to attach an amp wall to.

    Comment

    • rlwagens
      • Feb 2008
      • 147

      • Michigan

      • 2006 SANTE 210
      #3
      I can grab some pictures of my boat this weekend to show you what I did. There will be a hump where MLA mentioned that was glassed in at the factory, I believe that alone was enough for my two SYN4s. Then I glassed in another board further towards the rear of the boat on the same wall, hidden pretty well but can still access it when you lift the observers seat. Last season added a 410 and SYN 2 and stacked it over my upper SYN 4 with plexiglass and LEDs in between. That's less than ideal for venting but still end up with plenty of storage space in that locker after relocating the sub to under the driver's helm.

      Comment

      • 210Luke
        • Jun 2017
        • 69

        • Carthage, TN

        • 2006 Super Air Nautique 210 TE
        #4
        Originally posted by rlwagens
        I can grab some pictures of my boat this weekend to show you what I did. There will be a hump where MLA mentioned that was glassed in at the factory, I believe that alone was enough for my two SYN4s. Then I glassed in another board further towards the rear of the boat on the same wall, hidden pretty well but can still access it when you lift the observers seat. Last season added a 410 and SYN 2 and stacked it over my upper SYN 4 with plexiglass and LEDs in between. That's less than ideal for venting but still end up with plenty of storage space in that locker after relocating the sub to under the driver's helm.
        That sounds pretty cool. Would love to see the pics!


        Sent from my iPhone using PLT Nautique

        Comment

        Previous template Next
        Working...
        X