Wet Sounds FC5U-L (Side Mount Bracket) - Who's used them for REV8 or REV10?

[SCNautique210SAN]

I can't picture where and how Wet Sounds FC5U side mount bracket would go on a 2013 G23 and how they'd fit with REV10s - https://www.wetsounds.com/product/ADP-Nautique-FC5-L

I'm considering going 4 REV10s - two on the outer top mounts on the tower using the FC5U top mount adapters to leave head room down the isle and if the side mounts would pull the 2nd pair off a little to the outer part of the tower that would be great. Anyone used these side mounts with a REV10 and have a pic they could share? Would they collide with the tower racks?

[MLA]

The Wet Sounds Rev and Icon series speakers all have the same mounting bolt pattern, so all their adapters fit their speakers all the same. With that said, I dont think thats the adapter you need for a G tower. I dont think it has a "lower" mounting spot.

[SCNautique210SAN]

Thanks MLA . Exactly why I asked! The FC5-U is their "Upper" which look like a direct adapter for the Roswells that are on mine now. These ones make sense to me.

But on their website Wet Sounds also had the FC5-L for the "Lower" mounting point and I couldn't remember seeing a lower mounting point on my tower. I'm not near the boat otherwise I'd look myself to figure out where these "Lower" mounts go. I'll probably call them tomorrow too to ask what they're all about.

[MLA]

The G-tower has 4 flat spots across the top. Each flat spot has 3 holes. For 4 Wet Sounds pods, you would need 2 pair of these. https://www.wetsounds.com/product/ADP-Nautique-FC5-U Or 1 pair of these and 1 pair of X-Mount pods and 1 pair with the TC3-S clamps and mount them on the side uprights.

Those FCT5-L would fit the towers that you might find on a 210 or 230.

[SCNautique210SAN]

Thanks MLA I guess I'll stick with the FC5-U in the existing 4 spots. That's the cleanest and it's already wired that way. Appreciate it